Commercial Network Cabling and Fiber Projects in Atlanta

Project Summary

On a commercial construction project in Jefferson, Georgia, DataTel 360 installed an underground conduit pathway to support future fiber connectivity between an existing building and a newly constructed training center. The photograph above captures the work in progress: a long open trench cut through red Georgia clay, with two-inch conduit run along the trench bottom, a compact excavator staged on the graded site, and utility poles following the tree line beyond.

Outside plant work like this is fundamentally about planning for what comes next. Rather than pulling fiber immediately, this phase of the project establishes the protected underground route that fiber will later travel through. When the training center is ready to be brought onto the network, the pathway is already in the ground, already protected, and already routed between the two buildings — no new excavation required across a finished campus.

Timing is what makes this approach work. Placing conduit while the site is still under construction — while the ground is open, the grading is unfinished, and heavy equipment is already mobilized — is dramatically less disruptive and less expensive than trenching later through completed landscaping, sidewalks, paving, or parking areas. Commercial owners who plan communications pathways during construction consistently avoid the cost and downtime of retrofitting them afterward.

The work also had to fit into an active commercial construction environment. Trenching for communications infrastructure runs alongside grading, utilities, paving, and building work performed by other trades, so routing and sequencing were coordinated to keep the pathway clear of conflicts and positioned where it can be accessed and served for the long term.

The outcome is commercial communications infrastructure built for growth: a clean, protected, building-to-building route that keeps the customer's future fiber installation simple, serviceable, and ready to expand as the campus does.

• Location: Jefferson, Georgia
• Category: Outside Plant / OSP
• Two-inch underground conduit
• Building-to-building fiber pathway
• Active commercial construction site
• Existing building + new training center

Working at height is where we excel

Scissor lift and boom lift projects are a specialty of DataTel 360. Warehouses, distribution centers, and industrial buildings put the work overhead — open ceilings, exposed structure, high bays, and long cable runs that can't be reached from a ladder. That's the environment our crews are set up for.

Whether it's running Cat 6 in a warehouse for computers and workstations, cabling IP cameras, or feeding Wi-Fi access points across a facility, elevated work demands a different approach than a standard office install. Cable paths have to be planned around structure, lighting, sprinkler lines, racking, and conveyor systems. Lifts have to be positioned and repositioned around aisles and inventory. And in an operating facility, all of it has to happen without shutting the floor down.

The result is clean, properly supported overhead cabling that reaches exactly where the business needs connectivity — installed safely, and sequenced around the way the building actually runs.

• Cat 6 cabling for computers & workstations
• IP security camera drops
• Wi-Fi access point cabling
• High-bay & open-ceiling environments
• Warehouses & distribution centers
• Work sequenced around operations